不銹鋼扁鐵的使用範圍廣泛，用於工業工具、機械零件及建築上用於結構與扶梯等等，其製成有分為冷軋裁切而成，熱軋抽至而成，因應需求可以將成型之不銹鋼扁鐵導角或拋砂為HL，增加其使用的廣泛度，建錩集團目前可以提供冷軋100%台灣製造外，也可提供冷、熱軋中國製造之材料，方便客戶採購，熱軋與冷軋的最大差異在於切面。
| 厚度 | 寬度(常用規格) | |||||
|---|---|---|---|---|---|---|
| 3.0~12.0 | 16mm | 20mm | 25mm | 30~32mm | 38~40mm | 50~150mm |
nbsp;
| Surface Finish | Definition | Application |
| No.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Building construction |
STAINLESS STEEL HRAP FLAT BAR
| SEPCIFICATIONS | ALLOWABLE DEVIATION | ||||||
|---|---|---|---|---|---|---|---|
| 25 X 3~15MM (1#8243; X 1/8#8243;~3/5#8243;) |
1.WIDTH≦50mm,THICKNESS≦20mm, THICKNESS DEVITION ±0.4mm. |
||||||
| 30 X 3~16MM (1-1/5#8243; X 1/8#8243;~16/25#8243;) |
|||||||
| 35 X 3~16MM (1-2/5#8243; X 1/8#8243;~16/25#8243;) |
|||||||
| 40 X 3~16MM (1-3/5#8243;X1/8#8243;~16/25#8243;) |
|||||||
| 45 X 4~16MM (1-4/5#8243; X 4/25#8243;~16/25#8243;) |
|||||||
| 50 X 4~16MM (2#8243; X 4/25#8243;~16/25#8243;) |
|||||||
| 60 X 4~16MM (2-2/5#8243; X4/25#8243;~16/25#8243;) |
|||||||
| 65 X 4~16MM (2-3/5#8243; X 4/25#8243;~16/25#8243;) |
|||||||
| 70 X 5~16MM (2-4/5#8243; X 4/25#8243;~16/25#8243;) |
1).WIDHT≦50mm,THICKNESS DEVIATION ± 0.8mm | ||||||
| 75 X 5~16MM (3#8243; X 1/5#8243;~16/25#8243;) |
|||||||
| 80 X 5~16MM (3-1/5#8243; x 1/5#8243;~16/25#8243;) |
2).50mmlt;WIDTH≦75mm,WIDTH DEVIATION ± 1.2mm | ||||||
| 90 X 5~16MM (3-1/2#8243; X1/5#8243;~16/25#8243;) |
|||||||
| 100 X 5~18MM (4#8243; X 1/5#8243;~7/10#8243;) |
3).75mmlt;WIDTH≦150mm,WIDTH DEVIATION ±1.5mm. | ||||||
| 120 X 8/20MM (4-7/10#8243;~3/10#8243;4/5#8243;) |
|||||||
| (130~300) X (10~20)MM (5#8243;~12#8243;) x(2/5#8243;~4/5#8243;) |
|||||||